JBE-02V dome housing exterior

JBE-02V housing series

JBE-02V Series PoE Dome Cameras

The JBE-02V series brings several imaging configurations into one dome housing, allowing buyers to select the resolution and processing platform while keeping the same exterior design across an order.

The camera uses a metal-and-plastic housing rated IP67 for indoor and outdoor installation. Twelve infrared LEDs provide illumination in dark conditions. A 3.6mm fixed lens is standard, with 2.8mm and 6mm alternatives available.

Compare the configurations below by sensor, frame rate and platform as well as resolution. Each order should identify the complete model and selected lens so that the supplied configuration is clear.

Model
JBE-02V series
  • Samples: Paid samples; lead time 7 days.
  • Standard orders: MOQ 100 units.
  • OEM orders: MOQ 200 units for logo and label customization.
  • Bulk orders: Lead time 21 days.
  • Recorder and Ethernet cables sold separately.

Shared housing, lens and package

TypeDome IP Camera
HousingMetal + plastic
Housing size specification2.5 inch
Ingress protectionIP67
Infrared12 IR LEDs
LensStandard 3.6mm fixed focal length; optional 2.8mm / 6mm
EncodingH.264 / H.265
AudioMicrophone supported
DetectionHuman and vehicle detection
ConnectivitySupports ONVIF connectivity. Confirm compatibility with the intended recorder or VMS and the required functions before deployment.
PowerPoE sales configuration; confirm the complete model and ordered power configuration.
EnvironmentIndoor / outdoor
Included accessoriesScrew pack, mounting base and waterproof connector
Packaging dimensions120 × 120 × 100mm (box dimensions, not camera dimensions)

The listed order configuration uses PoE. The source sheet describes a PoE option; it does not establish that every hardware version includes PoE by default.

Available Configurations

Choose the configuration, not just the megapixel count.

A higher resolution changes the recording requirements, but it does not by itself establish better image quality for every scene. Compare the available sensor and frame-rate specifications, then assess a sample at the intended viewing distance. Confirm the selected configuration with the recorder and storage arrangement planned for the installation.

ModelResolutionSensorFrame rateChip configurationConfiguration
JBE-402V4MP1/2.9 inch CMOS4MP up to 20fpsMC6322+CV5003
JBE-402V-24MP1/2.9 inch CMOS4MP up to 20fpsFH8852V310+CV2008
JBE-502V5MP1/2.8 inch CMOS5MP up to 20fpsFH8852V310+GC5053

Browse PoE cameras

PoE Camera Installation and Connections

All ports show functional connections only, not the rear-panel positions of any specific model. Check the selected camera, recorder, switch and power specifications before installation.

1. Direct Connection to a PoE NVR

  1. Connect each compatible PoE camera to a camera PoE port on the PoE NVR using an Ethernet cable.
  2. Connect the NVR LAN port to the router or local network. Connect a local monitor to the NVR HDMI output.
  3. Connect the specified NVR power supply. Check the PoE standard, per-port power and total power budget for the selected cameras.
  4. Configure and verify local recording. Internet access and the supported remote-access setup are required for viewing from outside the local network.

2. Connection via a PoE Switch

  1. Connect compatible PoE cameras to the PoE switch. A non-PoE IP camera needs its own specified power supply and an Ethernet data connection to the LAN.
  2. Connect the switch uplink to the router or LAN and connect the NVR LAN port to that same network. Follow the selected equipment documentation for the network topology.
  3. Power the NVR and PoE switch separately using their specified supplies. Connect the NVR HDMI output to a local monitor.
  4. Add compatible cameras to the NVR and verify recording. Confirm addressing, supported protocols, recording channels and the PoE power budget before installation.

Local recording and viewing on the connected monitor do not require internet. Remote viewing requires internet access and a supported, correctly configured remote-access method.

Direct Connection to a PoE NVR

Functional diagram: PoE cameras connect to NVR PoE ports; NVR LAN connects to a router, HDMI to a local monitor, and a separate supply powers the NVR.

Functional connections only; port positions are illustrative.

Ethernet Waterproof Connector Assembly

Follow these steps to assemble the waterproof cover around the camera’s Ethernet connection.

  1. Prepare the cable

    Slide the locking cap, rubber cable seal and waterproof housing onto the Ethernet cable before terminating the RJ45 plug.

  2. Connect and seal

    Terminate the RJ45 plug, make sure the O-ring is correctly seated on the camera connector, and insert the plug into the camera’s network socket.

  3. Secure the assembly

    Attach the waterproof housing to the camera connector, position the rubber cable seal and tighten the locking cap securely.

Assembly details may vary by connector kit. Follow the instructions supplied with your camera.

Ethernet Waterproof Connector Assembly

100%
Exploded view and assembly steps for a security camera RJ45 waterproof connector.

Ordering questions

Does every JBE-02V configuration use the same housing?

The configurations listed for this series share the JBE-02V exterior. Imaging specifications vary by configuration, so confirm the complete model before ordering.

Which lens should I order?

The standard lens is 3.6mm. The 2.8mm and 6mm alternatives offer different framing options. Select the lens against the mounting position and required view; no field-of-view angle is specified here.

Are the recorder and network cables included?

No. The recorder and Ethernet cables are purchased separately.

What customization is available from 200 units?

Logo and label customization is available from 200 units. Confirm the artwork and selected product configuration before production.

Discuss the selected configuration

Selected: Entire JBE-02V series

Include your selected lens, quantity and logo or label artwork requirements. Confirm quantities for the chosen configuration; no mixed-model MOQ arrangement is specified here.

Send Series Enquiry